Laboratory relocation and construction without losing continuity.
Diagnostic, research, biotech and pharmaceutical environments depend on sensitive instruments and specialty utilities. We plan every move and buildout around them.

Laboratory & Life Sciences facilities
What we focus on
- Laboratory relocations
- Sensitive instrument protection
- Specialized equipment coordination
- Laboratory construction
- Specialty utilities
- Environmental considerations
- Operational continuity
- Phased transitions
Construction, relocation and facility services, coordinated.
Laboratory buildouts
Lab renovation and buildout with coordination of specialty utilities and environmental requirements.
Instrument and lab moves
Instruments protected, moved and coordinated with manufacturers and qualified partners for reinstallation and verification.
Lifecycle support
Repairs and improvements that keep the lab ready for the next change in equipment or workflow.
Laboratory Renovation and Equipment Moves
Work inside an operating laboratory: walls reframed for new double doors, fume hoods and biosafety cabinets relocated, a department sink remodeled and the finance offices painted.
Wall opened and reframed, then new double doors with vision lites hung and finished.




Units decontaminated by our certification partner, then wrapped, padded and strapped to dollies, moved through the lab, and calibrated and certified at the new location.




Department sink remodeled with a new tile backsplash, and the finance offices painted with furniture protected in place.




Planning a move, remodel or repair? Call or email us to get a walkthrough on the calendar.

Sheet Vinyl and Clean Room Work
Sterile processing, operating rooms, labs and anterooms need floors that seal tight and clean easily. We install sheet vinyl with heat-welded seams and integral cove base, and our crews suit up and follow the room's protocol to work in clean and controlled spaces.
- Heat-welded seamsHomogeneous and heterogeneous sheet vinyl installed with heat-welded seams for a continuous, cleanable surface with no open joints to trap contaminants.
- Integral flash cove baseFlooring run up the wall with a cove former and cap strip so the floor-to-wall transition can be wiped down, the standard in ORs, SPD, labs and anterooms.
- Substrate preparationOld flooring and adhesive removed down to the slab, then moisture testing, patching and leveling so the new sheet lays flat and bonds right.
- Clean rooms and suiting upCrews gown to the facility's protocol before entering: coveralls, shoe covers, hair and beard covers and gloves, with tacky mats at entry and tools wiped down going in.
- Working inside containmentFloor replacement in occupied departments done behind ICRA barriers with HEPA negative air, dust controlled at the source and debris bagged before it leaves the space.
- Turnover readySeams, coves and transitions inspected, the area cleaned to the facility's standard and handed back for terminal cleaning and return to service.
Fume Hood, Biosafety Cabinet and Lab Setup
Fume hoods and biosafety cabinets prepped, wrapped and moved through an operating lab, with decon, calibration and certification by our certification partner. At the destination we remodeled the floor and walls, assembled the lab tables and placed the equipment on them.




What laboratory & life sciences clients say.
“Hercules has been a key component in achieving our goals with no impact to our operation.”
Have a project in planning?
Call or email us about the facility, the scope and the schedule. Consultations are complimentary.
